jmbreslin 0 Posted July 8, 2009 Share Posted July 8, 2009 Villain was relatively new to the table and seemed on the tight side.Full Tilt No-Limit Hold'em, $0.05 BB (8 handed) - Full-Tilt Converter Tool from FlopTurnRiver.comCO ($4.99)Button ($0.49)Hero (SB) ($4.15)BB ($6.87)UTG ($0.93)UTG+1 ($2.06)MP1 ($8.19)MP2 ($1.78)Preflop: Hero is SB with J, A3 folds, MP2 calls $0.05, CO bets $0.15, 1 fold, Hero calls $0.13, 2 foldsFlop: ($0.40) Q, 10, 7(2 players)Hero bets $0.15, CO raises to $0.40, Hero ???Normally I'm not calling a raise from a tight player w/ AJ in the blinds but with since it's soooted I figured I'd play it for the flush potential. On the flop I decide to donk partly to test villain and partly to disguise my hand. When she raises I figure she's got a made hand, perhaps AA, KK, AQ. Do you reraise with the intention of getting it in here? Flat call to see if you make your hand on the turn? Link to post Share on other sites
tskillz187 0 Posted July 8, 2009 Share Posted July 8, 2009 If you are betting here it is to bet/3bet. You should only bet/3bet if you think villain may raise as a bluff or raise and then also fold. Your hand is obviously really strong, if your A isn't an out you still have 12 clean outs to the nuts. Also, your donk is way too small, make it .30-.40. When you 3bet shove, you need to try and get some kind of fold equity. Anyways, you can note villain as a fish, cuz no matter what he has his raise size sucks. That board is very dangerous and he raises to such a small amount that it's just never good. Link to post Share on other sites
Temporary Nuts 1 Posted July 8, 2009 Share Posted July 8, 2009 Agree with T. Also blocker sized donk bets suck in general unless you know the guy spazzes out to them, and you flop a big hand that you want to take to showdown. Normally I'm not calling a raise from a tight player w/ AJ in the blinds but with since it's soooted I figured I'd play it for the flush potential.With MP limping and the raise being so small you should be playing it for more than just "flush potential." You definitely have enough equity to get 2 streets of post flop value on top pair, even if it's a passive line. This is an easy call imo, and I think you can go down to ATs and AJo Link to post Share on other sites
mtdesmoines 2 Posted July 8, 2009 Share Posted July 8, 2009 Villain was relatively new to the table and seemed on the tight side.Full Tilt No-Limit Hold'em, $0.05 BB (8 handed) - Full-Tilt Converter Tool from FlopTurnRiver.comCO ($4.99)Button ($0.49)Hero (SB) ($4.15)BB ($6.87)UTG ($0.93)UTG+1 ($2.06)MP1 ($8.19)MP2 ($1.78)Preflop: Hero is SB with J, A3 folds, MP2 calls $0.05, CO bets $0.15, 1 fold, Hero calls $0.13, 2 foldsFlop: ($0.40) Q, 10, 7(2 players)Hero bets $0.15, CO raises to $0.40, Hero ???Normally I'm not calling a raise from a tight player w/ AJ in the blinds but with since it's soooted I figured I'd play it for the flush potential. On the flop I decide to donk partly to test villain and partly to disguise my hand. When she raises I figure she's got a made hand, perhaps AA, KK, AQ. Do you reraise with the intention of getting it in here? Flat call to see if you make your hand on the turn?I'm not calling PF with AJ sooted to fold this shit. I'm just not. I think I get it in, because I have an image to maintain. Link to post Share on other sites
krup24 0 Posted July 8, 2009 Share Posted July 8, 2009 When you 3bet shove, you need to try and get some kind of fold equity. Anyways, you can note villain as a fish, cuz no matter what he has his raise size sucks. That board is very dangerous and he raises to such a small amount that it's just never good. there is a great section on this in Skalansky's NL Theory book. and this is a huge flaw in many players at micros and mid-high stakes. not betting in relation to the pot size. i do believe however he did give reasons where this can be used effectively but i smoke too much herb and forget.. Link to post Share on other sites
tskillz187 0 Posted July 8, 2009 Share Posted July 8, 2009 Blocking? or Bluffing cheap? Either way it's pretty bad on a board like this to raise small. I've never read the book though. Link to post Share on other sites
mtdesmoines 2 Posted July 8, 2009 Share Posted July 8, 2009 I'm not calling PF with AJ sooted to fold this shit. I'm just not. I think I get it in, because I have an image to maintain.EDIT: Also, your flop donk is too small and his raise seems like some kind of autopilot raise. Link to post Share on other sites
tbrick412 0 Posted July 8, 2009 Share Posted July 8, 2009 i'm raising to like $1.80ish with the intention of getting it in. Link to post Share on other sites
tskillz187 0 Posted July 8, 2009 Share Posted July 8, 2009 i'm raising to like $1.80ish with the intention of getting it in.What are you doing if he flats $1.80 and you brick the turn out of position? What are you doing if you hit the turn? Pot will be about $3.80 or so and villain will have $3 stack. Link to post Share on other sites
krup24 0 Posted July 8, 2009 Share Posted July 8, 2009 Blocking? or Bluffing cheap? Either way it's pretty bad on a board like this to raise small. I've never read the book though.both and also causing spaz outs. it was def board and villian dependent and wouldn't apply on this board. i've tried it and have failed a few and caused a few spaz shoves. i was just talking about concept cause it's interesting imo. Link to post Share on other sites
tskillz187 0 Posted July 8, 2009 Share Posted July 8, 2009 If you have the book, look it up when you get a chance, I'd like to see one of his examples and see if I agree/it teaches me something. Link to post Share on other sites
mtdesmoines 2 Posted July 8, 2009 Share Posted July 8, 2009 both and also causing spaz outs. it was def board and villian dependent and wouldn't apply on this board. i've tried it and have failed a few and caused a few spaz shoves. i was just talking about concept cause it's interesting imo.I've tried it and just can't seem to stimulate spaz moves. Link to post Share on other sites
Temporary Nuts 1 Posted July 8, 2009 Share Posted July 8, 2009 If you have the book, look it up when you get a chance, I'd like to see one of his examples and see if I agree/it teaches me something.If he's talking about NL Theory and Practice I don't recall a huge mention about this concept... just that you should raise blocker bets quite often, and that other good players will raise blocker bets often so it's good to use as a level. It didn't go much more in depth than that.I use this concept when I flop something like top set that rarely gets action otherwise. Link to post Share on other sites
jmbreslin 0 Posted July 8, 2009 Author Share Posted July 8, 2009 What are you doing if he flats $1.80 and you brick the turn out of position? What are you doing if you hit the turn? Pot will be about $3.80 or so and villain will have $3 stack.I was wondering about this myself. Stacks are too deep to 3-bet shove, so if there is a reasonable chance that he'd just call my 3-bet and we're going to see a turn, wouldn't it be better for me to just call the initial raise and see the turn? Or is the risk of building the pot and whiffing on the turn still worth the benefit of building the pot and hitting as compared to calling, hitting the turn, and winning a smaller pot?I would like to know how people would play the turn if they 3-bet to $1.80ish and villain flat called. Link to post Share on other sites
tskillz187 0 Posted July 8, 2009 Share Posted July 8, 2009 I'd just shove as my 3bet. Link to post Share on other sites
NoBBiR 0 Posted July 8, 2009 Share Posted July 8, 2009 I'd just shove as my 3bet. Link to post Share on other sites
qnshustler 0 Posted July 8, 2009 Share Posted July 8, 2009 i agree to donk more, but also would like to hear how people play various turns if you 3bet to 1.80 and villain flats. Link to post Share on other sites
KingJames 11 Posted July 8, 2009 Share Posted July 8, 2009 I'd just shove as my 3bet.This.If we donk-bet more, stacks get (slightly) smaller Link to post Share on other sites
tskillz187 0 Posted July 8, 2009 Share Posted July 8, 2009 i agree to donk more, but also would like to hear how people play various turns if you 3bet to 1.80 and villain flats.With very little thought, you shove if you miss and check if you hit and if he checks back you shove river. Link to post Share on other sites
rrumsey 0 Posted July 9, 2009 Share Posted July 9, 2009 I agree with a few above you need to bet at least half on flop. The problem now to 4-bet or to not 4-bet. I 4-bet this for 2 reasons. 1. our micro donk was very small so a repop from like a flush draw is kind of likely, also AQ or Q10 but or flop bet failed to give us any real info so its time to find out if you have many out, 15, or a lot of outs 12, and see what happens if you get flated on the turn. Also if we face a 5-bet im stumped because it probably means a set. If that would happen according to my poker stove we are at about 34.8% equity so i would curse the world and fold. The thing about this hand is worst case scenario we are almost 35%, so we only need 16% foldong equity on 2 streets to show a profit. 2. i kind of got off topic but we are live to the nuts in at least 12 cards,... It looks like to me we induced a bluff or an overplay of a Q to try and take it down now. Link to post Share on other sites
jmbreslin 0 Posted July 9, 2009 Author Share Posted July 9, 2009 This.If we donk-bet more, stacks get (slightly) smallerGood point. If I donk $.40, and she raises to something like $1, then a 3-bet shove doesn't look so ridiculous. But shoving $4 over a raise to $.40 into a pot that is less than $1 seems a bit over the top to say the least. Link to post Share on other sites
qnshustler 0 Posted July 9, 2009 Share Posted July 9, 2009 If he's talking about NL Theory and Practice I don't recall a huge mention about this concept... just that you should raise blocker bets quite often, and that other good players will raise blocker bets often so it's good to use as a level. It didn't go much more in depth than that.I use this concept when I flop something like top set that rarely gets action otherwise. This doesn't relate to this thread really, but last night I read this response, Temp Nuts, and it stayed in the back of my mind...later on I was in a $11, 300-man tourny and used this exact idea when I flopped mid set on a pretty dry board. I donked for around 1/4 to 1/3 the pot and got someone to call with AK high, he turned an Ace and I stacked him, then went on to finish 7th in the tourny for $135. My usual line in that situation would probably be to lead more around 1/2 pot or go for c/r depending on villains and action, so kudos for popping that idea into my head because it worked out beautifully for me. Link to post Share on other sites
jmbreslin 0 Posted July 9, 2009 Author Share Posted July 9, 2009 At micro stakes donkbets are usually just that. It's amazing how often the following type of scenario occurs (at .02-.05):I raise to .15 w/ AQ, one of the blinds calls. Flop comes J85, villain donks .10 or .15, I raise, he folds. Happens far, far more often than villain donking with a big hand to get action. Link to post Share on other sites
TrueAce13 18 Posted July 9, 2009 Share Posted July 9, 2009 I think PF, this is a 3bet or foldNow...never fold. Raise. Reraise...arrrrrrrrr innnnnnnnn Link to post Share on other sites
Temporary Nuts 1 Posted July 9, 2009 Share Posted July 9, 2009 so kudos for popping that idea into my head because it worked out beautifully for me.Don't thank me. Just pick up a copy of Sklansky's NL Holdem Theory and Practice. It will pay for itself I promise. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now